C3.1 Product analysis and evaluation questions for IB Design Technology

85 questions on Product analysis and evaluation, written by Augment in the style of IB exam papers. Six of them are below in full, to answer on paper.

  • IB Design Technology
  • Part of C Design in context
  • SL and HL

Questions by paper and level

SL and HL questions are for students at either level. HL only questions cover what only HL students study.

PaperSL and HLHL onlyAll
Paper 132436
Paper 2371249
Every paper691685

Counted on

Questions to try

Written by Augment in the style of IB exams, not past papers. Answer them on paper, then check each one against its markscheme with a free account.

Question 1 · DT-00439Paper 1 · 1 mark

Experienced nurses take 40 seconds to set a dose on a new hospital infusion pump, compared with 15 seconds on the pump it replaced.

Which usability objective does the new pump perform worse on?

  1. A

    Efficiency

  2. B

    Learnability

  3. C

    Memorability

  4. D

    Satisfaction

Question 2 · DT-00386Paper 2 · 17 marks

A city library is replacing the self-service book-return kiosk at its main entrance. Users tap their library card, place each book on a scanner, wait for the screen to confirm the return, push the book into a chute and then choose whether to print or email a receipt. A design consultancy observed 40 users returning books over three days and recorded the number of users who made an error at each step, see Figure 3.

Figure 3, horizontal bar chart of users (out of 40) who made an error at each kiosk step: tap library card 5; place book on scanner 14; wait for confirmation 8; push book into chute 3; choose receipt 10.
Figure 3: Users who made an error at each step (40 users observed)
  1. (a)

    State the step of the book-return kiosk at which the most users made an error.

    1 mark

  2. (b)

    Calculate the percentage of the observed users who made an error when choosing a receipt at the book-return kiosk. Show your working.

    2 marks

  3. (c)

    Outline one reason why observing users gives the consultancy more reliable data about the book-return kiosk than asking users to remember the problems they had.

    2 marks

  4. (d)

    Explain one limitation of the data in Figure 3 for improving the book-return kiosk.

    3 marks

  5. (e)

    Explain how a task analysis, interviews and a scenario could be used to improve the design of the book-return kiosk.

    9 marks

Question 3 · DT-00443Paper 1 · 1 mark

Two versions, X and Y, of an e-scooter rental app were tested with the same group of users. The results are shown in the table.

Measure

Version X

Version Y

First-time users who unlocked a scooter without help / %

90

60

Mean unlock time for practiced users / s

25

12

Mean errors per unlock

0.4

0.4

Mean satisfaction rating (1 = low, 5 = high)

3.1

4.2

Which statement is supported by the results?

  1. A

    X is better for learnability, efficiency and satisfaction

  2. B

    Y is better for learnability but worse for efficiency

  3. C

    Y is better than X for errors

  4. D

    X is better for learnability; Y is better for efficiency and satisfaction

Question 4 · DT-00545Paper 2 · 17 marks

A city council has asked a designer to create the Canopy, a new bus shelter for its main street. On the first site visit, the designer sketched ideas by hand while talking to council officers. She then built a CAD model and produced photorealistic renderings, made a 1 : 20 scale model for a public meeting with residents, and sent formal drawings to the steel fabricator. Figure 1 shows one of these drawings.

Formal drawing of the Canopy shelter in three separate 2D views with no perspective: View A (from the front) below View B (from above) and to the left of View C (from the side). Projection lines join the views. The roof, posts and bench are labeled on View C.
Figure 1: A drawing sent to the steel fabricator (not to scale)
  1. (a)

    State the type of drawing shown in Figure 1.

    1 mark

  2. (b)

    Outline one reason why the designer sketched by hand during the first site visit for the Canopy.

    2 marks

  3. (c)

    Outline one disadvantage of showing photorealistic renderings of the Canopy to residents.

    2 marks

  4. (d)

    Explain one advantage of using the 1 : 20 scale model of the Canopy at the public meeting.

    3 marks

  5. (e)

    Explain how sketches, CAD models and the scale model were used to communicate the design of the Canopy to different stakeholders.

    9 marks

Question 5 · DT-00845Paper 1 · HL only · 1 mark

Four concepts for a digital kitchen scale were rated by users from 1 (poor) to 5 (excellent).

Concept

Desirability

Usability

Usefulness

W

4.3

1.8

4.1

X

2.1

4.4

4.5

Y

4.6

4.2

1.9

Z

3.9

4.0

4.2

Which concept is most likely to attract buyers but fail at the transact stage?

  1. A

    Concept W

  2. B

    Concept X

  3. C

    Concept Y

  4. D

    Concept Z

Question 6 · DT-00569Paper 2 · 7 marks

Nook sells modular shelving that customers configure from cubes, doors and drawers on its website. The Nook app lets a customer point a phone at a wall in their home and see a full-size virtual model of their chosen configuration placed there using augmented reality (AR). The customer can walk around it and change the configuration before ordering.

  1. (a)

    Outline one way the AR model helps a customer decide on the size of their Nook shelving.

    2 marks

  2. (b)

    Outline one limitation of the AR model compared with seeing the Nook shelving in a showroom.

    2 marks

  3. (c)

    Explain how data gathered from customers using the Nook AR app could inform the design of future shelving modules.

    3 marks

Practice all 85 in Augment

Free with an account. Every question has its markscheme, and Augment keeps the ones you got wrong so you can come back to them.

More questions in Design in context

  1. C1.1Responsibility of the designer
  2. C1.2Inclusive design
  3. C1.3Beyond usabilityHL only
  4. C2.1Design for sustainability
  5. C2.2Design for a circular economy
  6. C3.1Product analysis and evaluationThis page
  7. C3.2Life-cycle analysisHL only
  8. C4.1Design for manufacture strategiesHL only

Check your answers in Augment

A free account opens all 85 questions on Product analysis and evaluation with their markschemes, and keeps a record of what you have marked.