C1.1 Responsibility of the designer questions for IB Design Technology

147 questions on Responsibility of the designer, written by Augment in the style of IB exam papers. Six of them are below in full, to answer on paper.

  • IB Design Technology
  • Part of C Design in context
  • SL and HL

Questions by paper and level

SL and HL questions are for students at either level. HL only questions cover what only HL students study.

PaperSL and HLHL onlyAll
Paper 130434
Paper 26647113
Every paper9651147

Counted on

Questions to try

Written by Augment in the style of IB exams, not past papers. Answer them on paper, then check each one against its markscheme with a free account.

Question 1 · DT-00725Paper 1 · 1 mark

A designer deliberately gives a product a limited useful life so that customers will need to buy a replacement. What type of obsolescence is this?

  1. A

    Functional

  2. B

    Planned

  3. C

    Style

  4. D

    Technological

Question 2 · DT-00377Paper 2 · 7 marks

A rail company is developing the ParcelPoint, a self-service locker bank on station platforms where commuters collect online orders by scanning a code on their phone. Before redesigning the screen and door layout, researchers spent two weeks on three busy platforms watching how commuters used the existing lockers, without speaking to them.

  1. (a)

    Outline one advantage of observing commuters on the platforms rather than in a usability laboratory when developing the ParcelPoint.

    2 marks

  2. (b)

    Outline one limitation of using only user observation to research the ParcelPoint.

    2 marks

  3. (c)

    Explain one ethical issue the researchers must consider when observing commuters using the ParcelPoint.

    3 marks

Question 3 · DT-00726Paper 1 · 1 mark

What is the main purpose of a product safety standard?

  1. A

    To set the price at which a type of product is sold

  2. B

    To describe the form that buyers find most attractive

  3. C

    To record which company designed and made a product

  4. D

    To set agreed minimum requirements a product must meet

Question 4 · DT-00382Paper 2 · 18 marks

Ambulance crews in a large city carry patients down the stairs of apartment buildings using a basic folding chair, and many crew members report back injuries. A company is developing the Ascendo, a stair evacuation chair with rubber tracks that let the chair slide down steps while the crew guides it. The Ascendo must carry patients of up to 160 kg in stairwells as narrow as 0.9 m. The design team includes two paramedics, a mechanical engineer, an ergonomist, an industrial designer and a former patient who was carried down eight floors after a fall.

  1. (a)

    List two features of the environment in which the Ascendo is used that the design team must understand.

    2 marks

  2. (b)

    Outline how the ergonomist contributes to the design of the Ascendo.

    2 marks

  3. (c)

    Outline one disadvantage of using a multidisciplinary team to develop the Ascendo.

    2 marks

  4. (d)

    Explain one way including the former patient in the team leads to a better design of the Ascendo.

    3 marks

  5. (e)

    Explain how the multidisciplinary team could develop a deep understanding of the user, the task and the environment for the Ascendo.

    9 marks

Question 5 · DT-00727Paper 1 · 1 mark

When designing a product, a designer has a responsibility to which of the following?

I. The client who commissioned the product
II. The community where the product is made and used
III. The environment affected across the product's life

  1. A

    I and II only

  2. B

    I and III only

  3. C

    II and III only

  4. D

    I, II and III

Question 6 · DT-00390Paper 2 · 14 marks

A university is designing a new covered bicycle shelter for its main campus because bicycles are often left locked to railings and lamp posts. The estates team emailed an online survey to all students; 300 replied to the question "How do you usually lock your bicycle on campus?". The results are shown in Figure 5. "Lock the frame only" means the frame is locked to its own wheel, not to a fixed object.

Figure 5, horizontal bar chart of how 300 students lock their bicycles on campus: lock to a railing or lamp post 144; lock to a bicycle stand 96; lock the frame only (not to anything) 51; do not lock it 9.
Figure 5: How students lock their bicycles on campus (300 replies)
  1. (a)

    State the most common way students lock their bicycles on campus, according to Figure 5.

    1 mark

  2. (b)

    Outline one advantage of using an online survey in the research for the bicycle shelter.

    2 marks

  3. (c)

    Outline one reason why the 300 replies may not represent all the users of the bicycle shelter.

    2 marks

  4. (d)

    Explain how user observation could be used to check the survey results for the bicycle shelter.

    3 marks

  5. (e)

    Explain two ways the results in Figure 5 could influence the design of the bicycle shelter.

    6 marks

Practice all 147 in Augment

Free with an account. Every question has its markscheme, and Augment keeps the ones you got wrong so you can come back to them.

More questions in Design in context

  1. C1.1Responsibility of the designerThis page
  2. C1.2Inclusive design
  3. C1.3Beyond usabilityHL only
  4. C2.1Design for sustainability
  5. C2.2Design for a circular economy
  6. C3.1Product analysis and evaluation
  7. C3.2Life-cycle analysisHL only
  8. C4.1Design for manufacture strategiesHL only

Check your answers in Augment

A free account opens all 147 questions on Responsibility of the designer with their markschemes, and keeps a record of what you have marked.