- Subjects
- Design Technology
- Question bank
- C2.2 Design for a circular economy
C2.2 Design for a circular economy questions for IB Design Technology
152 questions on Design for a circular economy, written by Augment in the style of IB exam papers. Six of them are below in full, to answer on paper.
- IB Design Technology
- Part of C Design in context
- SL and HL
Questions by paper and level
SL and HL questions are for students at either level. HL only questions cover what only HL students study.
| Paper | SL and HL | HL only | All |
|---|---|---|---|
| Paper 1 | 36 | 16 | 52 |
| Paper 2 | 56 | 44 | 100 |
| Every paper | 92 | 60 | 152 |
Counted on
Questions to try
Written by Augment in the style of IB exams, not past papers. Answer them on paper, then check each one against its markscheme with a free account.
Which statement best explains how biodegradable biomaterials help designers to design out waste in a circular economy?
The Ridgeway 40-liter hiking backpack is made from woven nylon fabric with a polyurethane coating on the inside. Its panels are joined by stitching with polyester thread, and the shoulder straps are attached with bar tacks (a short, dense row of zigzag stitches). A removable inner waterproof bag has heat-welded seams. The plastic hip-belt buckles are held on loops of webbing, and the company offers a lifetime repair service.
- (a)
List two joining techniques used in the Ridgeway backpack.
2 marks
- (b)
Describe how the woven nylon fabric of the Ridgeway backpack is produced.
2 marks
- (c)
Outline why the shoulder straps of the Ridgeway backpack are attached with bar tacks.
2 marks
- (d)
Explain one reason why the seams of the Ridgeway inner bag are heat welded rather than stitched.
3 marks
- (e)
Explain two ways in which the joining techniques used in the Ridgeway backpack make it easier to repair.
6 marks
A furniture retailer replaces the expanded polystyrene (EPS) corner pads in its packaging with pads grown from mycelium on hemp waste. Which of the following are benefits of this change for a circular economy?
I. The pads can be composted at the end of their use
II. A waste product from farming becomes a raw material
III. The pads can be recycled in the same stream as plastic bottles
A community repair café prints replacement control knobs for old food mixers whose manufacturers no longer supply spare parts. The original knobs were injection molded. A volunteer measures a broken knob, models it in CAD and prints it in ABS on a fused deposition modeling (FDM) printer. Each knob takes about 40 minutes to print with a layer height of 0.2 mm.
- (a)
State the form in which the ABS is supplied to the FDM printer used by the repair café.
1 mark
- (b)
Describe how the FDM printer builds each layer of the replacement knob.
2 marks
- (c)
Outline one reason why the surface of the printed knob is rougher than the surface of the original injection-molded knob.
2 marks
A café is switching to cups made from polylactic acid (PLA), a biomaterial. The graph shows the mass remaining of PLA cup samples kept in industrial compost at 58 °C and in a home compost bin at about 25 °C.

Which conclusion is supported by the graph?
Stitchback supplies spare parts for vintage sewing machines that are no longer made. Instead of holding stock, it keeps a digital file for each of 1,200 different parts and prints each part when it is ordered, by material extrusion, on a farm of 40 printers. Most parts are small knobs, spool pins and gears printed in nylon or PETG. Each printer runs for 20 hours a day, and an average part takes 2.5 hours to print.
- (a)
List two advantages of material extrusion for producing Stitchback's spare parts.
2 marks
- (b)
Calculate the maximum number of average parts that Stitchback's print farm can produce in one day.
2 marks
- (c)
Outline one reason why printing parts on demand suits Stitchback better than holding stock of injection-molded parts.
2 marks
- (d)
Explain one limitation of a material-extruded nylon gear compared with an injection-molded nylon gear for a Stitchback customer.
3 marks
- (e)
Discuss the environmental impact of Stitchback's approach of printing spare parts on demand.
6 marks
Practice all 152 in Augment
Free with an account. Every question has its markscheme, and Augment keeps the ones you got wrong so you can come back to them.
More questions in Design in context
- C1.1Responsibility of the designer
- C1.2Inclusive design
- C1.3Beyond usabilityHL only
- C2.1Design for sustainability
- C2.2Design for a circular economyThis page
- C3.1Product analysis and evaluation
- C3.2Life-cycle analysisHL only
- C4.1Design for manufacture strategiesHL only
Check your answers in Augment
A free account opens all 152 questions on Design for a circular economy with their markschemes, and keeps a record of what you have marked.