A3.1 Material classification and properties questions for IB Design Technology

212 questions on Material classification and properties, written by Augment in the style of IB exam papers. Six of them are below in full, to answer on paper.

  • IB Design Technology
  • Part of A Design in theory
  • SL and HL

Questions by paper and level

SL and HL questions are for students at either level. HL only questions cover what only HL students study.

PaperSL and HLHL onlyAll
Paper 144347
Paper 29570165
Every paper13973212

Counted on

Questions to try

Written by Augment in the style of IB exams, not past papers. Answer them on paper, then check each one against its markscheme with a free account.

Question 1 · DT-00123Paper 1 · 1 mark

A toy designer makes two otherwise identical prototypes of a wooden toy train, one in beech and one in pine. Both are dropped repeatedly onto a hard floor to see which shows less damage.

Which aspect of the design are these prototypes mainly used to test?

  1. A

    Scale

  2. B

    Materials

  3. C

    Aesthetics

  4. D

    Function

Question 2 · DT-00389Paper 2 · 7 marks

Workers in a frozen-food warehouse pick orders by hand at −25 °C. Their insulated gloves keep their hands warm but make it hard to grip small boxes. To develop a new glove, the Frostgrip, two designers worked full shifts picking orders in the freezer alongside the staff. They also timed how long they took to pick the same 20-item order under different conditions, see Table 2.

Condition

Mean time to pick 20 items / s

Bare hands at 20 °C

95

Current glove at 20 °C

140

Current glove at −25 °C, after 2 hours of work

210

Table 2: Picking times recorded by the designers

  1. (a)

    Calculate the percentage increase in picking time when wearing the current glove at −25 °C after 2 hours of work compared with wearing it at 20 °C. Show your working.

    2 marks

  2. (b)

    Explain how carrying out the picking task in the freezer helped the designers to develop a better Frostgrip glove.

    3 marks

  3. (c)

    Outline one limitation of the designers carrying out the picking task themselves when developing the Frostgrip.

    2 marks

Question 3 · DT-00139Paper 1 · 1 mark

Which of the following are disadvantages of rapid prototyping?

I. Parts may not have the same properties as the final mass-produced parts
II. The size of a part is limited by the build volume of the machine
III. The cost per part is high when large quantities are needed

  1. A

    I and II only

  2. B

    I and III only

  3. C

    II and III only

  4. D

    I, II and III

Question 4 · DT-00395Paper 2 · 7 marks

A medical device company is developing Stride Junior, a carbon-fiber running blade for children aged 6 to 12 who have a lower-leg amputation. The team includes a prosthetist (who fits artificial limbs), a physiotherapist, a materials engineer, a child psychologist and an industrial designer. Children grow quickly, and many stop using their prostheses because they feel self-conscious.

  1. (a)

    Outline how the physiotherapist contributes to the team's understanding of the task of running with Stride Junior.

    2 marks

  2. (b)

    Outline how the child psychologist contributes to the design of Stride Junior.

    2 marks

  3. (c)

    Explain one way the knowledge of the prosthetist and the materials engineer could be combined to meet the needs of growing children using Stride Junior.

    3 marks

Question 5 · DT-00141Paper 1 · 1 mark

What is the main advantage to a designer of classifying materials by their physical, chemical and mechanical properties?

  1. A

    It removes the need to test models made from the material

  2. B

    It means every material in one group has the same cost

  3. C

    It allows materials with the properties a product needs to be compared

  4. D

    It guarantees the material is available from local suppliers

Question 6 · DT-00401Paper 2 · HL only · 5 marks

The Stackit desk organizer is made from five flat parts laser cut from 3 mm cast acrylic sheet. The parts have slots that push together without glue, so the organizer can be sold flat packed.

  1. (a)

    Outline how the laser cutter produces the slots in the Stackit parts.

    2 marks

  2. (b)

    Outline one advantage of laser cutting the Stackit parts rather than cutting them by hand with a saw.

    2 marks

  3. (c)

    State one other sheet material that could be laser cut to make the parts of the Stackit desk organizer.

    1 mark

Practice all 212 in Augment

Free with an account. Every question has its markscheme, and Augment keeps the ones you got wrong so you can come back to them.

More questions in Design in theory

  1. A1.1Ergonomics
  2. A2.1User-centred research methods
  3. A2.2Prototyping techniques
  4. A3.1Material classification and propertiesThis page
  5. A3.2Introduction to structural systemsHL only
  6. A3.3Introduction to mechanical systemsHL only
  7. A3.4Introduction to electronic systemsHL only
  8. A4.1Manufacturing techniquesHL only

Check your answers in Augment

A free account opens all 212 questions on Material classification and properties with their markschemes, and keeps a record of what you have marked.