A2.2 Prototyping techniques questions for IB Design Technology

137 questions on Prototyping techniques, written by Augment in the style of IB exam papers. Six of them are below in full, to answer on paper.

  • IB Design Technology
  • Part of A Design in theory
  • SL and HL

Questions by paper and level

SL and HL questions are for students at either level. HL only questions cover what only HL students study.

PaperSL and HLHL onlyAll
Paper 174175
Paper 2501262
Every paper12413137

Counted on

Questions to try

Written by Augment in the style of IB exams, not past papers. Answer them on paper, then check each one against its markscheme with a free account.

Question 1 · DT-00101Paper 1 · 1 mark

Which of the following best describes a low-fidelity prototype?

  1. A

    A working model made from the final materials

  2. B

    A quick, rough model that shows the basic idea

  3. C

    A CAD model used to predict stresses in a part

  4. D

    A finished model shown to clients before launch

Question 2 · DT-00454Paper 2 · HL only · 6 marks

A dental clinic prints models of patients' teeth on a desktop stereolithography (SLA) printer. The models are used to check the fit of crowns and to plan treatment, so they must reproduce details smaller than 0.1 mm. Figure 1 shows the main parts of the printer.

Figure 1: side view of an SLA printer. A box P sends a beam to an angled mirror Q, which turns it down onto the surface of a liquid-filled tank R. A part sits on a plate S inside the tank; S hangs from a vertical rod and an arrow shows it moving down.
Figure 1: The main parts of an SLA printer
  1. (a)

    Identify the parts labeled R and S in Figure 1.

    2 marks

  2. (b)

    Outline one reason why SLA, rather than FDM, is used to print the clinic's dental models.

    2 marks

  3. (c)

    Outline one post-processing stage needed before a printed dental model can be used by the clinic.

    2 marks

Question 3 · DT-00102Paper 1 · 1 mark

A team designing a banking app for smartphones draws each screen on paper. Users "tap" the paper screens while a designer swaps in the next drawing.

What is the main advantage of this approach at this stage?

  1. A

    It shows exactly how the final colors will look

  2. B

    It measures how quickly the app loads

  3. C

    It finds errors in the final program code

  4. D

    Changes can be made cheaply before any code is written

Question 4 · DT-00455Paper 2 · HL only · 6 marks

An architecture practice builds massing models of proposed buildings on a laminated object manufacture (LOM) machine. The machine bonds sheets of adhesive-coated paper together and cuts each sheet with a blade. The finished models look and feel similar to wood and can be up to 300 mm tall.

  1. (a)

    Outline how the LOM machine produces one layer of a massing model.

    2 marks

  2. (b)

    Explain one advantage of LOM for producing the architecture practice's massing models.

    3 marks

  3. (c)

    State one limitation of the LOM massing models for the architecture practice.

    1 mark

Question 5 · DT-00103Paper 1 · 1 mark

What is a disadvantage of a high-fidelity prototype compared with a low-fidelity prototype?

  1. A

    It takes more time and money to make

  2. B

    It gives less realistic feedback from users

  3. C

    It cannot be tested by potential users

  4. D

    It shows less detail of the final product

Question 6 · DT-00456Paper 2 · HL only · 6 marks

Beamo, a small start-up, has designed a handlebar bracket for a bicycle light. Early versions of the bracket were printed in PLA on a fused deposition modeling (FDM) printer to check its size and how it clips onto different handlebars. The 600 brackets sold in the first year are made in nylon (PA12) by selective laser sintering (SLS).

  1. (a)

    State what is meant by rapid prototyping, as used in the development of the Beamo bracket.

    1 mark

  2. (b)

    Outline one reason why FDM in PLA was suitable for the initial base models of the Beamo bracket.

    2 marks

  3. (c)

    Explain why SLS in nylon, rather than FDM, is used to produce the refined brackets sold to customers.

    3 marks

Practice all 137 in Augment

Free with an account. Every question has its markscheme, and Augment keeps the ones you got wrong so you can come back to them.

More questions in Design in theory

  1. A1.1Ergonomics
  2. A2.1User-centred research methods
  3. A2.2Prototyping techniquesThis page
  4. A3.1Material classification and properties
  5. A3.2Introduction to structural systemsHL only
  6. A3.3Introduction to mechanical systemsHL only
  7. A3.4Introduction to electronic systemsHL only
  8. A4.1Manufacturing techniquesHL only

Check your answers in Augment

A free account opens all 137 questions on Prototyping techniques with their markschemes, and keeps a record of what you have marked.